How To Reset Foscam Camera To Factory Settings

Foscam camera is an integrated wireless IP Photographic camera with a color sensor and an enabling viewing resolution of 1280X720.

It combines a high-quality digital video camera with a powerful webserver to give you clear images to your desktop from anywhere, either over the cyberspace or from a local network.

Yet, the camera tends to have some issues that may force you to do a hard reset from time to fourth dimension. For case, you may desire to reset a Foscam photographic camera factory settings if you have forgotten the ambassador password.

Also, a reset may exist necessary if you lot have configured Third Party DDNS successfully, but you want to use the manufacturer's DDNS over again.

The advantage is that all Foscam cameras come with a reset button located at the lesser of the device. You can use the button to reset the device to mill settings.

How to reset Foscam photographic camera to factory defaults

You can reset a Foscam camera to mill defaults by doing the following:

Locate the reset push button at the bottom of the camera
Long press the button for approximately thirty seconds
After thirty seconds, the camera volition reboot itself.
If your camera says Reset Successful before the thirty seconds elapse, release the reset button.

Once the photographic camera restarts, it volition restore all settings to factory defaults. Depending on your model, the reset may have between ten and fifteen seconds to complete.

Where is the reset button on the Foscam camera?

The location of the reset push on the Foscam camera will depend on the blazon of photographic camera y'all are using. In other words:

The reset push button on the Indoor PT camera is on the bottom of the photographic camera, inside the torso. It is in a small pigsty, pregnant you volition take to use a paperclip to press the button and restore your photographic camera to factory settings.
If you are using an Indoor Cube camera, the Reset button is on the back of the unit.
For the Indoor Dome camera, the Reset push button is on the tail cable coming out of the dorsum of the photographic camera.
If you are working with Bullet style camera, the Reset push button is on the tail cablevision coming out of the back of the photographic camera.
For the Outdoor PT photographic camera, you lot volition find the button on the tail cable coming out of the back of the camera.

If y'all are using the Fosbaby series of the camera, the button is on the body of the camera.

Why is my Foscam Photographic camera not resetting?

Technically, your Foscam camera should reset after 30 seconds of pressing the reset push button. If your Foscam won't reset:

Power-bike the device by turning it OFF and ON.
Repeat the reset procedure by pressing the push for 30 seconds

If it does not piece of work, contact Foscam customer services at support@foscam.com for further assistance.

Why is the Foscam default countersign non working afterwards reset?

Foscam does not have a default countersign. However, the default username is ADMIN.

Therefore, if the organisation prompts you to enter a password, simply provide the username. Get out the password field blank.

Even so, you will accept to set the password at first employ to foreclose unauthorized users from login into your camera.

Here is how:

Select the account you want to gear up the password. The default user accounts are admin, operator, and company
Select Change Password
In the first password field, leave the space blank
Enter a new password
Click on Modify to make the changes

Yous volition use the new password to log in to your photographic camera. If you desire to reset your Foscam countersign, y'all will have to factory reset the camera, as shown above.

What is the Foscam default IP subsequently reset?

You tin can find out the IP address of the Foscam photographic camera by doing the following:

Connect the camera via an Ethernet cable to a LAN port on the router
Power on the camera
Connect your computer to the same router
Allow the device to complete the self-test or until you hear Wired connection successful
Launch the IP Camera Equipment Search tool
Y'all will see the photographic camera listed every bit one of the available items on the network
Double click the list

The default web browser will open to the appropriate photographic camera IP address.

Conclusion

You lot tin reset your Foscam camera to factory settings past pressing the reset button located at the bottom of the device. Unfortunately, resetting the camera will also reset the countersign.

Luckily, the Foscam default password is blank. Y'all will have to ready information technology once again to prevent unauthorized access.

Related guides